Key Takeaways
-
Recertification reports must be signed and sealed by a Florida-licensed architect or professional engineer; a general home inspector alone does not meet this requirement.
-
In Miami-Dade, the report is generally due within 90 days of the notice, and owners may request a one-time extension before the deadline, subject to approval and a fee.
-
Miami-Dade generally requires recertification at 30 years for inland buildings and 25 years for coastal buildings, then every 10 years after.
-
Buildings four stories or taller may need separate structural and electrical inspections, each performed by a appropriately qualified Florida-licensed engineer.
-
Get the written scope and fee before signing, and ask whether follow-up visits, permits, repair documents, and specialists are included to avoid surprise costs.
-
Recertification is distinct from Florida's milestone inspection program, so confirm with your local authority whether one or both programs apply to your building.
Got a recertification notice in the mail? Take a breath. You are not alone, and this is very doable. Every year, owners and boards across South Florida open that notice and wonder where to start. The clock is ticking, the rules feel confusing, and nobody wants a fine.
Here is the good news. When you hire a building inspector for recertification, the process becomes much smoother. The right professional reads the notice with you, explains what is needed, and delivers a sealed report on time.
In this friendly guide, we will walk through who you actually need, how to check credentials, what to ask, and how to avoid common mistakes. We wrote it for condo boards, commercial owners, HOA managers, apartment owners, and investors in Broward and Miami-Dade Counties. Let’s make this feel a whole lot easier.

What Does It Mean to Hire a Building Inspector for Recertification?
In everyday talk, people say “building inspector.” For recertification, though, you usually need something more specific. You need a Florida-licensed architect or professional engineer. This person inspects the building, writes the report, and signs and seals it.
The report is not a quick walk-through. In Miami-Dade, it looks at the building’s general structural condition and its electrical systems. Then the professional certifies whether the building is safe for its specified use and continued occupancy. You can read the county’s official guidance on the Miami-Dade County Recertification page.
Not sure how recertification works overall? Our guide on what building recertification is and why it matters is a great place to begin.

When Is Building Recertification Required?
Timing matters, so let’s keep it simple. In Miami-Dade, the countywide program generally starts at 30 years for inland buildings. For buildings near the coast, it starts at 25 years. After that, you repeat it every 10 years.
The local building authority decides if your property is covered. They also send the official notice. Some cities have their own procedures, so always confirm the details with your local building department.
Some properties are exempt. The county’s notice lists examples such as single-family homes, duplexes, and buildings with an occupant load of 10 or fewer and an area of 2,000 square feet or less. Confirm your status with the local authority before you assume anything.
Want to see how the calendar looks this year? Check our building inspection schedule and recertification deadlines for 2026.
The 90-Day Clock
Once you get your notice, Miami-Dade generally expects the report within 90 days. That sounds like plenty of time, but it goes fast. Inspections, repairs, and paperwork all take time.
The City of Miami says owners may request a one-time extension before the due date. It is subject to approval and a fee, and rules can change, so verify the current process with your jurisdiction. Do not wait until the last week to ask.
Who Is Qualified to Perform the Inspection?
This is the question we hear most. The short answer is a Florida-licensed professional engineer or architect who is authorized to practice in the state. They must also have training and experience that fits the type of work being certified.
For larger buildings, the rules get a little more detailed. Under Miami-Dade guidance, buildings four stories or taller may need structural and electrical inspections done separately. Each one must be done by an appropriately qualified Florida-licensed engineer. Structural engineers may also need to document relevant experience and state-recognized structural specialization.
Here is a quick look at who does what:
| Professional | Typical Role in Recertification | What to Confirm |
|---|---|---|
| Florida-licensed architect | Leads inspection and signs and seals the report where authorized | Active license and relevant building experience |
| Florida-licensed structural engineer | Evaluates structural condition | Active license and documented structural experience |
| Florida-licensed electrical engineer | Evaluates electrical systems separately when required | Active license and electrical experience |
| General home inspector | Not a substitute for the sealed recertification report | Does not meet the licensing requirement on its own |
Still wondering about the difference? Our article on certified vs. general inspectors breaks it down nicely.
How to Hire a Building Inspector: 7 Simple Steps
Think of this like hiring any trusted pro. A little prep up front saves a lot of stress later. Here is the order we recommend:
- Read your notice carefully. Note the deadline, the property details, and what reports are listed.
- Call the local building department. Ask which forms, credentials, and submission method apply to your building.
- Check the license. Confirm the professional has an active Florida license in good standing.
- Ask about similar buildings. A pro who has worked on towers, plazas, or apartments like yours will move faster.
- Request a written scope and fee. Know exactly what is included before you sign.
- Schedule early. Book the inspection right away so repairs, if needed, fit inside your timeline.
- Plan the submission. Confirm who files the report and how you will get the final approval.
For more help on the vetting side, see how to choose licensed building inspectors for recertification. And if you are in a hurry, this guide to finding a 40 year recertification inspector fast can help.
Questions to Ask Before You Hire
A friendly conversation tells you a lot. Here are questions that help you spot a great fit:
- Are you licensed in Florida as an architect or professional engineer, and is your license active?
- Have you completed recertification reports in my city or county?
- Will you handle structural and electrical, or do you bring in other licensed specialists?
- What technology do you use to inspect hard-to-reach areas?
- How soon can you start, and when will I receive the report?
- What is included in your fee, and what is not?
- Do you help with permits, repair documents, or follow-up inspections?
That last one matters. Some scopes leave out follow-up visits, repair work, permit documents, or extra specialists. Ask now so there are no surprises later.
What Does the Inspection Actually Include?
Let’s pull back the curtain. A recertification inspection usually covers two big areas.
Structural Review
The professional looks at the building’s overall structural condition. That can include foundations, walls, floors, roofs, balconies, and other load-bearing parts. They look for cracks, corrosion, water damage, and signs of movement. If you want a deeper look, read about what structural inspections involve for recertification.
Electrical Review
Next comes the electrical side. The professional checks panels, wiring, grounding, and safety conditions that affect people living or working in the building. Our 14 electrical inspection facts for recertification shows what to expect.
After the review, the professional certifies whether the building is safe for its use and continued occupancy. If problems turn up, the report explains what needs to be fixed.
Is a Milestone Inspection the Same Thing?
Great question, and an easy one to mix up. They are not the same. Florida’s milestone inspection program is a separate state process. It generally applies to condominium and cooperative buildings that are at least three habitable stories tall. A licensed architect or engineer performs a structural inspection.
Under Florida law (Section 553.899), the initial milestone inspection is generally due at 30 years of age and every 10 years after, with statutory exceptions. Phase One must be completed within 180 days after you receive written notice.
Some buildings may need both. So check with the authority to see which programs apply. Not sure which one fits you? Compare them in Milestone vs. Electrical Inspection: Which Does Your Building Need? or see SIRS vs. Milestone Inspection.
How Much Does It Cost to Hire a Building Inspector?
Everyone asks this, and the honest answer is: it depends. Price changes with building size, height, age, number of units, and how complex the systems are. Large towers cost more than small plazas.
Here is what usually moves the price:
- Number of stories and total square footage
- Whether structural and electrical must be done separately
- Access challenges, such as roofs, facades, and balconies
- Condition of the building and any added testing
- Reports from earlier inspections
Remember that the inspection fee is not the same as repair costs. Repairs, permits, and municipal fees are separate. For a closer look at budgets, see 3 costs behind your 40 year recertification and 6 building inspection cost mistakes that drain budgets.
What Happens If Deficiencies Are Found?
Don’t panic. Finding issues is normal, especially in older buildings. That is the whole point of recertification. The inspector documents what needs attention, and you create a plan to fix it.
After you submit, the City of Miami notes the review may result in a completion letter or a request for changes within six weeks. Always confirm review timelines with your own jurisdiction.
Here is a helpful way to think about next steps:
- Review the report with your inspector.
- Rank repairs by safety and urgency.
- Get repair bids from licensed contractors.
- Pull any needed permits.
- Have repairs verified and submit the final documents.
You can also search public cases using the Miami-Dade Building Recertification portal to check status for a property.
Why Choose O’Reilly Consultants?
When it comes to building recertification, O’Reilly Consultants is the top choice for owners across Broward and Miami-Dade Counties. We are a small, highly focused engineering team. That means you get real attention, not a handoff.
We handle 10-, 25-, and 40-year recertification inspections for condos, high-rise and multi-family apartments, offices, industrial buildings, and more. We use drones and 3D laser scanning, so we can check tough spots safely and thoroughly. That also helps us deliver fast, accurate estimates and clear, detailed reports.
Our team brings real depth:
- Sherard O’Reilly, owner and qualifying architect, with deep experience in ASTM E2018 property condition assessments and meticulous building documentation.
- Catalina Torres, Construction Manager and Engineer, with 27 years in civil engineering and construction management.
- Rafael Ojeda, Project Engineer, with 16+ years in environmental due diligence and over 1,000 Phase I Environmental Site Assessments completed.
We guide you from the first notice, to hiring a licensed professional, to submitting your paperwork. We also offer electrical and illumination safety inspections, SIRS, PCA, and HOA reserve studies. Curious about our story? Read about O’Reilly Consultants, or see what neighbors say when you visit us on Google — O’Reilly Consultants.
Tips for Different Property Owners
Every owner faces a slightly different challenge. Here is a quick guide to help you plan.
| Owner Type | Biggest Concern | Helpful Tip |
|---|---|---|
| Condo boards | Resident safety and special assessments | Start early and share timelines clearly with owners |
| Commercial owners | Tenant disruption | Schedule access in advance and coordinate with tenants |
| HOA managers | Tight 90-day deadlines | Gather past reports and plans before the inspection |
| Apartment owners | Many systems and units | Ask for a clear scope for each building |
| Investment firms | Value, insurance, and sale timing | Keep reports current to avoid delays in refinancing |
Common Mistakes to Avoid
A few simple missteps cause most of the headaches. Watch out for these:
- Waiting too long. The 90 days pass quickly, especially if repairs are needed.
- Hiring an unlicensed inspector. The report must be signed and sealed by a qualified Florida professional.
- Skipping the scope. A vague scope leads to surprise fees.
- Ignoring local rules. Cities can have their own procedures, so always check first.
- Not gathering documents. Old plans and prior reports save time.
For more on this, see 4 Miami recertification inspection mistakes to avoid and how to prepare for a building safety inspection in 2026.
Ready to Hire Your Inspector? Let’s Talk
Hiring the right professional turns a stressful notice into a clear plan. Check the license, ask good questions, get the scope in writing, and start early. You will be glad you did.
If you want a team that makes the process feel simple, we would love to help. Request a free quote today, or call us at (512) 567-1191. Together, we will get your building recertified on time and with confidence.
FAQs
Q: Who is qualified to perform a building recertification inspection?
A: A Florida-licensed professional engineer or architect who is authorized to practice in the state can do it. They need training and experience that fits the work, and they sign and seal the report. A general home inspector alone does not meet this requirement.
Q: How long do I have to submit a recertification report after getting my notice?
A: In Miami-Dade County, the report is generally due within 90 days of the date of notice. The City of Miami says owners may request a one-time extension before the due date, subject to approval and a fee. Always double-check the current rules with your local building department.
Q: Is a milestone inspection the same as building recertification?
A: Nope, they are two separate processes. Florida’s milestone inspection is a statewide program that generally covers condo and co-op buildings at least three habitable stories tall. Recertification is a local program, and some buildings may need both, so it’s smart to confirm with your jurisdiction.
Q: What happens if the inspector finds structural or electrical problems?
A: That is more common than you might think, and it is exactly why the inspection exists. Your inspector documents the issues, and you plan repairs with licensed contractors, pull permits if needed, and submit the final documents. Starting early gives you plenty of breathing room.





